Pcb Engineering

PCB trace DC impedance calculator

PCB trace DC impedance engineering calculator. Formula: trace_impedance = resistivity * trace_length / (trace_width * trace_thickness).

Quick Answer

Calculate PCB trace DC impedance

Calculator

Trace impedance (ohm)
—

Result Interpretation

The result shows Trace impedance in ohm, computed directly from the entered inputs using the formula defined for this tool.

Worked Example

Verified calculation

Given:

  • resistivity = 1.68E-8
  • trace_length = 0.1
  • trace_width = 0.0003
  • trace_thickness = 3.5E-5

Expected Result:

  • trace_impedance = 0.16

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

trace_impedance = resistivity * trace_length / (trace_width * trace_thickness)

Formula family: formula_pcb_trace_impedance

Variables

SymbolLabelRoleDescription
resistivity Resistivity INPUT Resistivity
trace_length Trace length INPUT Trace length
trace_width Trace width INPUT Trace width
trace_thickness Trace thickness INPUT Trace thickness
trace_impedance Trace impedance OUTPUT Trace impedance

Calculation Steps

  1. Enter the resistivity in ohm*m.
  2. Enter the trace length in m.
  3. Enter the trace width in m.
  4. Enter the trace thickness in m.
  5. Step 1: Compute trace impedance.
  6. Read the trace impedance (ohm) from the results.

Engineering Summary

Calculate PCB trace DC impedance The calculation uses Direct formula — trace_impedance = resistivity * trace_length / (trace_width * trace_thickness). This tool is applicable in pcb.toolfusion.net.

Notes / Limitations

  • ASSUMPTION
  • ASSUMPTION

Frequently Asked Questions

What does this calculator calculate?

The PCB trace DC impedance calculator estimates Trace impedance based on the input parameters you provide

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Resistivity (ohm*m), Trace length (m), Trace width (m), Trace thickness (m). Make sure all inputs use the specified units for consistent results

How does Resistivity affect the results?

The resistivity directly affects: Trace impedance. Increasing or decreasing this value will change these output values according to the engineering formula

How should I interpret the calculated results?

The calculator provides the following outputs: trace impedance in ohm. Results are computed from the input values using the defined calculation method. Always verify results against project-specific requirements and applicable standards

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas; the calculation method is based on Direct formula trace_impedance = resistivity * trace_length / (trace_width * trace_thickness). Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

When is this calculation useful?

The PCB trace DC impedance calculator is useful during preliminary design, feasibility studies, and quick engineering checks in pcb.toolfusion.net projects. It helps engineers and designers estimate key parameters before proceeding with detailed analysis

Technical Details
Assumption
Assumption

Browse More Tools

Explore the full index of engineering calculators on this vertical site.